John Deere 420,1020,2010,2020,2510,2520 Tractor Float "clutch pedal tight" Questions

Ad

Question about John Deere Garden

1 Answer

...clutch/brake pedal is out (in the drive position). If the belt is routed properly, and the belt is not tight in with the pedal in drive, chances are your tension pulley assembly may have broken, or ...

Ad

Question about Craftsman Garden

1 Answer

...clutch/brake pedal thanks gerry If the shifting is easy when the engine is off you have an adjustment to make on the clutching mechanism. if you loosen the belt (the adjustment is under the mower) it ...

Ad

Question about John Deere Garden

1 Answer

...on the battary tight, is the deck engaged, are you sitting firmly in the seat, have you fully depressed the clutch/brake pedal, the last three items are to make sure the saftey switches are ...

...HAVE RECHECK EVERYTHING I DID, THE BELT IS STILL LITTLE TIGHT IN NEUTRAL, BUT DOESN'T MOVE The belt or linkage is mal-adjusted or the belt is sticky and will not slip when the clutch pedal is ...

...clutch pedal & put it in gear it takes off. The only way you can stop is to turn it off. When you push the clutch in &I put it in gear it takes off. It will only stop when you turn the key off. I an ...

Question about Craftsman Garden

1 Answer

...pull back on the cluch pedal and it picks back up but when I let go it stops again. What is the problem? Thanks sounds like the spring on the clutch pully is not tight enouph and the belt is ...

Question about Mtd Garden

1 Answer

...ment or is it just wore out Have you checked your drive belt(s) for wear or pieces missing. With engine off and clutch/brake pedal up, check the tightness of the belt. You may just need a new

Question about Craftsman Garden

1 Answer

...attempt the incline grab the clutch pedal with your heel and pull it towards you if it starts pulling correctly you have a belt problem . If it makes no difference you are having hydro pump ...

...switch or a ground problem check the ground for corrosion and make sure it is tight at all places then check each safety switch they usually have one for the seat,mower deck and clutch/brake ...

Question about Yard Man Garden

1 Answer

clutch pedal and watch the idler pulley moving away from the belt, and the belt should become slack, if not check all the linkages, if the belt remains tight and the idler has moved away, then replace

Not finding what you are looking for?
John Deere 420,1020,2010,2020,2510,2520 Tractor Float Logo

1,561 questions posted

Ask a Question

Usually answered in minutes!

Top John Deere Garden Experts

john h

Level 3 Expert

29494 Answers

Sean Wright
Sean Wright

Level 3 Expert

2045 Answers

Jay Finke
Jay Finke

Level 3 Expert

1397 Answers

Are you a John Deere Garden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...