My Craftsman 42" 18.5hp lawn tractor will start fine but when I disengage the brake or engage the blades it cuts off. It was recently left out in the rain while I was working, did something short out?
...starts fine but dies when brake released or mower deck engaged. thought engine would not start if switch in seat not activated The first thing I would check is to make sure the drive belt is not ...
brake the fuse blows and the engine dies. What could it be? I have the same problem. Did you solve the issue? Hi, had the same problem with my machine, the problem was a short on the interlok solenoid
...brake on, clutch fully depressed, and any attachments (blades) disengaged. I have a JD160 Lawn Tractor (16HP-OHV-Auto) Started it up this Spring and drove about 50' and stopped. Now it will not go ...
...dies. i don't know if it's the pto switch, relay, electric clutch, or its just a p.o.s. any help is much appreciated micah OPERATOR PRESENCE SYSTEM Be sure operator presence and interlock systems are ...
starts but will not stay running when the handle bars are brought back to center ?!?!?! Read the manual. These so called "problems" are standard safety features that someone should have gone over with
...brake pedal one on the blade left 100 C and the 4th one is on the shift lever I believe Yes sounds like it's a saftey switch, it could be your seat or the reverse switch is stuck in Good answers, but ...
...brake, blade clutches disengaged? Usual first time out of the barn stuff should include: New Filter for air and oil, and if needed, the pre-filter sock over the air filter cartridge(s). New oil for ...
Question about Garden
...brake pedal linkage. If the engine doesn't start, loses power, or dies during use. Replace a recoil starter rope: Disconnect the spark plug cable for safety. Disengage the throttle cable from the ...
15 questions posted
Usually answered in minutes!
28 Questions
8 Questions
7 Questions
17 Questions
