Agri-Fab Agri - Fab Snow Blower - 42" "murray riding mower move" Questions

Murray Riding Mower will not move forward or back I have a murray riding mower, 10hp, 30'' cut. I was mowing my lawn when all of a suddent the mower would hardly move. I turned it off and when I ...

...murray riding lawn mower stops moving in forward and very slow in reverse after about 20 minutes of mowing. Automatic drive the balts are probably wore out. if they look cracked or thin in spots ...

MURRAY RIDING MOWER AUTOMATIC DRIVE WONT MOVE TRANSAXEL WILL NOT ENGAGE REAR PULLY IS SPINNING WHEN YOU PUSH PEDAL IT ACTS LIKE IT WANTS TO GO BUT WILL NOT MOVE YOU CAN PUSH AND IT ROLLS BUT NOT GOING

...Murray 18hp riding mower modl 8-38208x90...I have a prolem with putting the gear in reverse. If I move the shift lever forcefully through all the gears I can occassionaly get the reverse to w Dtae of ...

I have a 12.5 38in cut murray riding mower ,set up for about 7 years want move when i put it in gear roll it forcing it into gear 2 people job

...Murray 30" riding mower with a Tecumseh TVM195 8hp engine that won't start. The engine seems to be locked. I have removed the spark plug and tried to turn it, but it is still locked tight. The engine ...

...Murray 20in.push mower getting gas and fire but won't start The kill switch may be mis adjusted. Sometimes the cable stretches and you need to adjust it or shorten the cable. Possible you hit ...

murray model series 760 lawn tractor speed control. Tractor won't move. The speed control lever seems loose. Tractor starts fine and the belts look good. Can't figure it out. Well the lever is ...

...riding lawn mower All of a sudden, can't pull the knob up to engage the choke. It is like the wire inside the cable is fused. I have removed it from the mower and neither end, (the knob or the wire ...

Murray 42 in cut will not move and smoked when put in gear check the tension of the drive belt sounds like the belt is slipping also check it for oil if you have a oil leak and the oil got on the belt