water is coming out between motor and pump housing The pump seal needs to be replaced...it is a common part to find. If you need help in getting one please post the pump model and serial number. John
inside the wiring compartment or on that cover . Would be something with dots and HI , LO, and wire numbers.. or just a notation of 120 , 220 volts. How is it wired now
...and make sure they are jumpered correctly. Are you running on 220 or 120? Are there leads with numbers in the connection box that have wire nut or jumpers on
I changed my cartridges and now the filter will not fill to the top? I have NO pressure on the gauge and no pressure on the relief valve? It sounds like the seal didn't seat properly. Try re-seating ...
my pump is wired for 120 and the diagram shows that a black trace wire to terminal B and a black wire to terminal A.Know my problem is the way its hooked up is a black wire on A and a black and white ...
looking for shift sell for Flotec: FP5162 looking for shift sell for Flotec: FP5162 I've never heard of a shift sell for a flotec water pump. That is if you are looking for a part for a Flotec ...
Flotec pump takes long time to pressure up. Has worked fine for ~15 years + but noticed the last month or so it runs and runs even after water use is shut off. It's like it's half the pump it use to ...
...bad then the motor just hums and won't start turning. Be sure to replace with the same cap. The numbers you need will be printed on the side of the cap. Good
Hello,\r\n I'm running a 3 year old 1.0 hp Hayward Superpump on 220VAC mains, supplying a 25,000 gallon above ground pool through 1 1/2 inch lines with sand filter, and Polaris cleaner with booster ...
is 67 a prime number 67 prime or composite or neither 67 is a prime number.
86 questions posted
Usually answered in minutes!
22 Questions
3 Questions
3 Questions
