that they sell these kinds of swimming pool lights. I don't know if they have replacement parts or not, but they might be able to point you in the right direction or get you a replacement if necessary
LIGHT TO GO OFF - BEEN USING IT FOR A GOOD PART OF THE DAY - LOTS OF LEAVES AND BLOSSOMS IN POOL. There is a 5 min. delay on this sytem once you turn on the heater or pool sweep. During this delay you
...pool heater burners will not ignite The pilot light stays on but the burners will not ignite.I have the manual but do not know if this needs to be tested with fluke meter with the filter on or off.I ...
...pool heater. When I release the pilot light valve, the light will not stay lit. As long as I keep the valve pressed in, it will stay lit. I have checked all the connections and they seem to be fine, ...
...light has been 29 hours All salt generators need at least 4-5000 parts per million for up to 30 days for the generators to re-generate salt. it takes chlorine to combined with the generator and salt ...
...pool heater the pilot will stay lit as long as I have the switch pushed down. Once I release the switch, the pilot light goes out. I have tried to hold down the pilot as much as possible and turn the ...
...light will not stay lit, have full tank of propane gas clean or replace the flame sensor this link is for the parts diagram http://www.haywardnet.com/inground/products/replacement_parts.cfm if this ...
Pool Heater won't light the main burner. I have a Hayward Comfort Zone CZ1501 heater. I can light the pilot, but I never can get the main to light. I suspect my thermopile is bad since I don't see any
...light or display on the unit to tell what the pool or spa temp is or operate settings. Oddly enough, this function was not working in August when we moved in and I had a pool repair guy fix it with ...
421 questions posted
Usually answered in minutes!
104 Questions
92 Questions