...air from entering the pool through the return lines. Also, if the head and hose are covered with bubbles, give the hose a good tug. This will release the air bubbles and allow the pool cleaner to ...
Question about Jandy Pool & Spa
can anyone tell me what the air blower on my pool equipment is? The air blower on you equipment would supply air bubbles to yoor spa which when active sounds like a big vacuum
...air blower on my pool equipment do? air blower is if you have a spa If you have a hot tub the air blowers will allow you to use the jets. Theoretically you could set things up to put jets in the pool ...
air sensor so pool doesn't cycle all night You don't adjust this. You will need to replace the air sensor. You can get the sensor at or through any pool shop and it is simple to replace. You will find
how do you replace an air flow switch in a Jandy LX pool heater? order the flow switch open the door take off hoses take screws off reverse with new air swtch just dont send the old one
...air from entering the pool through the return lines. Also, if the head and hose are covered with bubbles, give the hose a good tug. This will release the air bubbles and allow the pool cleaners to ...
...is the Air Flow switch on a Jandy LX natural gas pool heater? And how do you change it? The air flow switch is in the upper panel on the inside of the heater. There are gray hoses plugged into
...Stop all the air from entering the pool thru the return line. If you see fine bubbles, give the hose a good tug. Also, readjust your return lines so that they are not interfering with your
...to the floor. It pulsates perfectly but just does not sink to the floor of pool Air trapped in the unit. They do not float unless air is trapped. Turn upside down under water to relieve trapped
421 questions posted
Usually answered in minutes!
104 Questions
92 Questions