Question about Pool & Spa
...pool heater Pentair ch minimax 150m has no voltage to gas valve. The pilot is on . ok is millivolt heater need to check all the safety circuit are getting power ,also check for clean filter ? is the ...
Pool an spa heater Model LD25ON. Nat. Gas It was working and then shut off. The pilot generator glows, but it never fires up. I have bypassed the pressure switch and still nothing. I did here clicking
heater fires 3 times then quits, light on control board quits blinking then minutes later it tries again. It sounds like a weak pilot generator. They wear out after a number of years. It is trying to ...
...doing this, you will have a new pilot generator that will be producing a larger amount of voltage to run the gas valve. Also, you will have a clean pilot tube and orifice so gas can run
...voltage goes to the gas valve and tells the valve that the pilot is lit and to keep the pilot gas line open. In almost all cases replacing the pilot generator will resolve the issue . They run about ...
...voltage to run the heater and after time it wears out and produces less and less voltage. A millivolt heater runs on less than one volt so any power loss can be a problem. If you are able, test the ...
...voltage. But UNDER one volt. That is called Milli-volts. just enough power to be generated, to operate the switches and gas valve to open and close as needed! I had a customer tell me one time, that ...
pool heater. gas co made a service call & relit the pilot light, it went out again 4 days later. Thank you for posting your question here on Fixya.com. Has anyone replaced the pilot generator yet?
Question about Pentair Pool & Spa
pool heater. The pilot is lit and there is nothing going on. It does not fire up. Had it serviced last year and some connections were rusted out - then replaced and worked fine all summer. Go to start
172 questions posted
Usually answered in minutes!
193 Questions
177 Questions
72 Questions