fl 4 code fl4 = Igniter Failure A. Igniter circuit is open: Check fuses on igniter wires B. Element has a fine crack in it: Replace igniter C. Igniter fault: Replace igniter
Question about Lochinvar Pool & Spa
great last season and was winterized properly... I just open the pool and now it is reading lockout ignition failure.... I can smell gas when it goes into ignition mode so I know it is getting gas, it
jandy lite 2 heater model lj325n - code fl4 - hot surface igniter problem- I tapped the gas valve and checked the fuse , still getting the same code. Igniter circuit is open. Check fuses on igniter ...
ignition and gas problem got a cda 737 built in gas oven/grill but its gone weird on me...firstly the grill has no ignition or gas...secondly top has gas but no ignition..the oven part works fine with
Newly installed igniter won't work Replaced with igniter from Direct Ignite. Looks just like original. power going to hot wire, but nothing happening with igniter. Is it correctly earthed to the frame
My new ignition module doesn't have TH, F1, F2 My new ignition module doesn't have TH, F1, F2 and 24VAC plugging sites so the pertinent wires are not connected anywhere. Is this ok? no, the ...
I have a Laars Lite2 gas spa heater. I just replaced the Fenwal Electronic Eignition. When I turn the power on it starts the start-up process, the gas starts to flow, but no clicking of the igniter, ...
ignition lockout Make sure all gas is turned on to the heater, ignition lockout can be one of several things, the majority of the time its a control board but, it could also be water in the heat ...
Question about Pentair Pool & Spa
Igniter works gas kicks on after igniter stops if it would spark a little longer it would lite I can lite it with a match Check igniter! You don't have the right spark? Lots of times it will short out
172 questions posted
Usually answered in minutes!
193 Questions
177 Questions
72 Questions