Jandy Lite 2 Natural Gas Pilot Light Heater "causes light stay lit" Questions

...stay lit,replace gas valve , pilot stays lit,but now it won't fire up. Jumped the TH terminals and it shut off the pilot light.thermostat is set highier than the water temp.Jump all ths switches and ...

...stay lit. Any ideas? Is this a standing pilot,or pilot always on. If so a bad thermocouple will cause pilot to go out. Thermocouple is a small copper tube running from the pilot light area to the gas ...

...stay lit and pilot light is on This sounds like the high temperature switch has failed and is telling the unit to shut down after it gets started, the pilot has to be lit for the main gas valve to ...

lit and appears strong blue flame. Two things, One you may have a low gas presure problem causing a bulid up of soot on your pilot, this will be a small ball of soot on your pilot and can be seen with

...light but the flame shoots out of the burner tubes and does not stay lit above the burners. It will then shut off and do the cycle 3 times. I have replaced the blower motor, check the gas pressure ...

light it says 'LED 13'. It does its three tries then the Fan LED turns off and the TFUSE and HiTemp LED stay on. Then brings up the E04. I know the TFUSE is fine because I just replaced it. What might

...light and stay lit, but will go out when you turn on the burner. The most likley cause for patio heaters that light but go out when turned up is a worn thermocouple. These are consumable items that ...

light. This voltage goes to the gas valve and tells the valve that the pilot is lit and to keep the pilot gas line open. In almost all cases replacing the pilot generator will resolve the issue . They

light not stay lit Looks like your pilot generator may have some corrosion on it. Follow the stainless steel tubing on the gas valve as it goes down to the burner area. At the end of this is the pilot