Question about Pentair Pool & Spa
soot around exhaust and heat indicator fails to light up - red service light s This heater had been out of use for a while, there is a fair amount of rust at the bottom when panel is removed. Replaced
heater trips thermal switch on exhaust collector after 10-15 minutes of run time. Went through the manual tested all gas and air pressures with digital differential manometer, adjusted to within spec,
how to clean teledyne laars heat exchanger take off top take off all baffles remove burn rack then rinse out with hose and wire brush to remove soot the best is if you can remove it so you can get to ...
Question about Teledyne Laars Pool & Spa
Pilot stays lit, burner comes on but only a portion of the burner area has flames. Model EG-175, Natural gas, 175,000 Btu/hr rating. I am running about 8" WC main pressure and 4" WC ...
...pool slide I opened the valve and it is running cold. Is it a thermostat or something else. Any help would be greatly appreciated Thank you for posting your question here on Fixya.com. There are only ...
Heater is smoking Fires up and runs just getting smoke out of the top exhaust when heater is cooled, remove top and clean out debris. if there is no debris, the color of smoke will indicate problem. ...
SOOT FROM CONDENSER ON A MINI MAX NT POOL HEATER That's a dirty job! The best way is to pull the heat exchanger out and power wash it. It is not a DIY for everyone because it involves dis- assembly of
clean heat exchanger h400 heat exchanger heavily sooted It needs to be removed and power washed. This is not always a DIY project, unless you have a strong back and are mechanically inclined. The ...
125 questions posted
Usually answered in minutes!
44 Questions