need to turn on pump but for the last few years a big cloud of rust comes from the pool heater staining the pool. It's a Raypack heater, removing one of the panels looks like you can hook up a hose on
...need to let your pool filter keep working. I would a) make sure that your pH, chlorine, and alkalinity levels are correct. An inproper balance of chemicals might be causing the cloudyness. b) Be sure ...
...need repairs over time. The hose swivels break and leak causing the pressure to drop. Even one leak will cause the cleaner to slow substantially. The pressure gauge that came with the cleaner is very ...
...need to change it And check the ambient conditions and then open it again. Hayward AQR15 Goldline AquaRite Electronic Salt Pool Chlorinator Control... Pentair 011017 IntelliFlo VS SVRS High ...
...need to know of the two hoses which leads to the water return going back to the pool. I'm currently not getting any chlorine going into the pool eventhough the canister is full of tablets. One ...
...check valve at bottom, and/or the flow control dial. How long have the tablets been in the feeder? If there is correct installation, or if all flow is correct, when you remove the lid, you should NOT ...
...need to change the sand. Before you change the sand in you filter, try removing approximately 1? of the top layer of sand, and replace with the exact amount of sand removed. This sometimes rids the ...
81 questions posted
Usually answered in minutes!
101 Questions
90 Questions
97 Questions
31 Questions
13 Questions