...1081 1563 I disconnected the pump for repair and cant remember where the black red and white wires go since there is more than 3 connections Electricity is "Color Blind" it does not care what ...
Question about AO Smith Pool & Spa
How do I wire up a A.O. Smith 3/4hp PB4 Booster Pump for 230V operation? How do I wire up a A.O. Smith 3/4hp PB4 Booster Pump (part O-173840-23) 230/115V motor. The lug plate fell apart and I am ...
I HAVE A AQUA FLOW 5HP ON THE RED AND BLACK WIRE I HAVE POWER BUT THE WHITE WIRE IS DEAD.SHOULD I HAVE POWER ON THE WHITE WIRE? THANKS, If your supply wire has 3 wires, a black, a red and a white wire
...to smith pool pump SQ1202? 220V incoming voltage. In most cases you will have two black or red wires and a green ground. Black or red wires to L1 and L2 green wire to green ground screw. 115v ...
Question about Pool & Spa
I have a 220V circuit (1 black wire, 1 white wire, and one green ground wire. The new stark industries pool pump has three terminals plus a ground, There is one terminal for a black wire (terminal A) ...
Question about Pool & Spa
need to know what wires go were.what wires go to black-white-green.for 115v. I'm not sure what your question is - it's not real clear. What I can tell you though: Black = HOT wire White = Neutral wire
wiring a 230v ao smith pump : L1 and L2 connection Hi, assuming you have 4-conductor wire, use the black and red wires for L1 and L2. It doesn't matter which goes to which. If you do not have a ...
Question about Pool & Spa
...have a 115/230 v spa pump, the pump connects to the circuit board terminals on the spa, only have 3 wires connected to the pump and the spa has 3 terminals and a ground lug, any idea how to wire it ...
Question about Pool & Spa
Replaced an old Magnetek century two speed with a AO smith century two speed. Hooked the wires up the same but unable to get the motor to operate in the high speed mode, suggestions! What is the ...
how to wire 2 wire 220V pool pump You should have a green wire (ground) and two other wires. Both the other wires are "hot" and they connect to the two posts in the motor, the ones with screw posts. ...
156 questions posted
Usually answered in minutes!
107 Questions
99 Questions
7 Questions