280 sweep hose does not sweep-drags behind unit-unit works fine-cleans pool Make sure that the opening at the end of your pool cleaners sweep hose is not blocked by the sweep hose scrubber. If this ...
Question about Polaris Pool & Spa
...the impeller on the booster is clogged restricting water flow I have taken apart the polaris and cleaned thoroughly. This happened once before and I had to have someone come out. If unit is ...
...replaced them. Ran sweep again worked at first briefly then nothing. Pulled apart pool pump, cleaned filters everything was ok. Wife checked pump when it was running said basket was dry (not ...
...sweep, nor the outlets still do not work. Any ideas of what to try next? ([email protected]) Thanks for reading. A pump motor running without any flow of water is one of two things. The impeller ...
...Clean the skimmer basket, pump basket, and pool filter. Check all of the hoses, connections, and swivels for leaks that could cause loss of water pressure. Make sure that your wheel RPM is between 28 ...
...skimmers are closed off properly. Suction can be checked by disconnecting suction hose from pool cleaner and placing your hand over the end of the hose. Suction hose may also have an obstruction ...
...so either the sweep works properly, or the pressure is right. I've added shock, added algae, cleaned the filters several times, yet still have problems because of the handles. I appreciate any ...
If i have a polaris pool sweep system can i still clean my pool with a regular vacuum from time to time? yes
...of perfeft performance, the Legend Platinum start to misbehave. Whells runing at 23 to 25 RPM after cleaning the hose filter. Main pool filter runs at 23 psi, booster pump runs and pressur relive ...
156 questions posted
Usually answered in minutes!
107 Questions
99 Questions
7 Questions