pump is probably fine the motor is the problem. If it just hums it might just be the capacitor on top of the motor. Don't know how long it sat there not able to start. Was the motor extremely hot ? If
pool pump: Turns on, but within 20 seconds shuts off and there's a burning smell. Sounds like the impeller is stopping, but then I don't know what I'm talking about. The sound changes from normal to a
...pool motor and flipped a breaker, reset and when I tried to turn motor on again, the motor just hummed but didn't turn over. The pump needs to be disassembled to inspect for an obstruction in the ...
Question about Hayward Pool Products Pool & Spa
Pool Pump isn't priming. The My Hayward Super ii Pool Pump isn't priming. The motor will start and hum for a few seconds but then it just shuts off. The motor will try again after a minute or two only
pump acts like it is froze up. It hums and smells like it is burning when it runs. It hums then shuts off, hums then shuts off? Either you need a new start/run capacitor or the bearings have seized. ...
Question about Hayward Pool Products Pool & Spa
...Pool Pump isn't priming. The motor will start, and hum for a few seconds but then it just shuts off. The motor will try again after a minute or two only to shut off again. The cycle continues. I've ...
...motor/pump? Most of the motors have an internal device called a clixon that detects excessive current and shuts off the motor. It then turns it on again when it cools off. If you wait and wait and ...
...on-all of a sudden pump was working fine.... we were following instructions with adding alkaline and calcium treatment... pump shut off at some point and now only hums motor is frozen up need new ...
...motor shaft due to a leaking pump seal. If the wet-end part of the pump is in decent condition you can have just a new motor and seal installed. Its always better to buy a complete new Pump with ...
1 questions posted
Usually answered in minutes!
38 Questions