...without taking the motor apart ..normally the long bolts that run through the motor housing can be taken out and the pump end serviced without pulling it all apart..send a photo of the
...Could you tell me some shake down steps. how do i check the motor without taking it apart. thanks john sand down any rust stains with coil brillo pad inside motor magnetic part needs to be ...
...You will have to take the wet-end(pump) apart to replace them. Take note of motor shaft size. Gecko/AquaFlo Flowmaster XP2 has 5/8" shaft.Get some here, or use the shaft seal guide on that same
...4 bolts in back or am I not pulling hard enough. Don't want to dammage anything. Thanks Gary B I believe you have to remove the wet end and the impeller as well to get the motor completely
How do I take a booster pump apart to replace the motor? Pull the back cap off the motor and hold the shaft as you spin off the impeller. The rest is straight forward enough.
take apart rule pool cover pump pump just hums will not pump water motor seized how over the winter the discharge hoses freezes thus no discharge pump burns out motor that is
Taking apart the motor to get to them is a bit much for most people. First find the make and model of your motor how many ball ball bearings there are and find somebody that sells the ones you'll need
7 questions posted
Usually answered in minutes!
337 Questions
104 Questions
92 Questions
