Question about Pentair Pool & Spa
cleaner moves than stops pressure valve keeps blowing off water after being replaced cleaner moves than stops make sure it is put on correctly there is an arrow to show water flow
my Polaris 380 just stop moving the pump was run and had good pressure turn one wheel they all turn freely also tail dose not move Check several things if these pool cleaners stop moving. Check the ...
Baracuda stopped working. it is not vibrating but not moving Baracuda stopped working. it is vibrating but not moving. It worked fine for the first 4 months we had it. We've checked and even ...
the sweeper does not move, there is suction, I will check it and put it back in the water it will move for about 1 min then stop replace diaphragm..
stops moving Regardless if on ''timed cycle'' or ''continuous'', my unit shuts down. The power box indicator light is still red indicating that power is available; however, the pump and tracks stop ...
the dolphin stopped working. I removed it from the pool. 1 week later, I put it back into the pool. It started, moved 2 feet and then stopped. I un plugged it, pulled it out of the water and moved the
Question about Zodiac Pool & Spa
...pacer pool cleaner moves in small intervals and then stop, once I pull on the pype it moves and stops again after say 30 seconds? Keeps stopping in a minute or two after pump is turned on these ...
...stops. It is still chugging, but does not move. Had this problem last summer and bought a new KK. Had the pool replumbed. Have put new gasket on leaf basket. Have tried opening drain line slightly, ...
...& doesn't move, why? Barracuda G3 head makes a humming sound, suctions for a few seconds & then stops. When I pull the head out of the pool while it's still connected to the skimmer & then throw ...
17 questions posted
Usually answered in minutes!
37 Questions
56 Questions
36 Questions
10 Questions
19 Questions