low suction to my vaccume suction too low for vaccume from the pump what can i do to troubleshoot backwash the pool then let it prime again and try the vacuum
...low you need to determine why ie: dirty filter, clogged vacuum port, bad hose, or your suction valves are not adjusted properly. you can also have too much suction. if this is correct and your ...
Question about AquaVac Pool & Spa
...low voltage breaker kick off every time in turn the vacuum on? The vacuum turns on but turns off after about 5 seconds. You can hear it click when it turns off. Check to see if the ENTIRE suction ...
...vacuum line and the attached hose has great suction until it is connected to the zodiak. Is there anything else we can do to get the zodiak pulsating? Thanks If the cleaner is not pulsating then ...
low =end of the pool . There is enough tubes to extend to the length of the pool. It goes in a circle in the deep end and up the sides of the wall . The pool guy told me to pull it out of the pool and
cleaner to operate. look in the sight glass of the pump for air bubbles, which could indicate an air leak in the vacuum line, or too low a water line. try moving you filter handle to "waste" or "drain
...vacuum is low, pressure in filter is low and pump appears to be louder then normal what's the problem If pressure gauge on filter is low, then most likely problem is obstruction is suction side of ...
44 questions posted
Usually answered in minutes!