...pump water When I turn on my spa, the pump hums but does not pump water. Is the pump toast? Hi there. Not necessarily. Inside the pump the impellor is plastic. Sometines the fins deteriorate to the ...
...water to pump basket (low). Turned on pump, return jets sent "bubbles" into pool, stopped, then noticed water leaking from where PVC pipe connects to top of pump. Where do I begin to get pump ...
...pump on till water is clear again.7 Turn pump off, return valve to filter. 8 Turn pump back on again. No power is added to a sand filter. There are some materials to "clean" your sand perhaps twice a ...
...pump starts up sounds like its on but not pumping water Open up the housing between the motor and the strainer basket on the inlet...the impeller, which is the part that actually moves the water is ...
water.. If your pump is not moving water you first want to check the skimmer and pump baskets and make sure they are empty as not to restrict water flow. Next make sure your pool filter is clean. Once
Pump running, no water moving through system... The pump is running, but no water is moving through the system. I've checked for obvious blockages (debris, etc) w/ no luck...any help would be ...
...pump. The water should be sucked into the pump almost instantly. If it did, you probably have a suction leak. Check out the lid o-ring. If the water didn't move your impeller is clogged or has ...
to be running properly but is not moving the water Make sure there is an o-ring on the lid. Fill pump with water and then appy a little petroleum jelly on the o-ring and tighten hand tight. Start pump
112 questions posted
Usually answered in minutes!
101 Questions
97 Questions
48 Questions
31 Questions
13 Questions
