Zodiac BARRACUDA G3 IN-GRND CLEANER "pool hoses end nots" Questions

...what is the problem? If these pool cleaners are not going to one end of the pool, make sure that your hose is long enough and that is it is balanced properly. Improper hose floats is likely the

end There are several things that could cause these automatic pool cleaners to have this problem. First, check the return line water flor and redirect it if necessary. Also, make sure that the hose is

...you can. They will set a current in the pool the cleaner with floating hoses can't over come. If you don't have eyeball returns you can get diverters to do this for you. That should fix your

from either end. You should also make sure that the hose length is not too long for your pool size. Your spin out might be too high. Try moving it to a lower setting and then running the cleaner again

...pool wall vertically down into the water hand over hand until the end of the hose is at the water line, water should well-up out of the end of the hose. keeping the end of the hose low at the water ...

...end connected to your telescopic pole and send it to the bottom of the pool. Then slowly feed the rest of the hose pushing water into the hose until you reach the opposite end. Water should come out ...

...pool for auto cleaners 2= hose memory ! hoses tend to get bends in them and tend over time to get a memory in the plastic so they allways say go right or left never straight ,stretching them out in ...

end of the pool, it is likely a problem with your hose. Check to make sure that it is long enough to cover the entire pool. Also, check the hose balance and make sure that it is correct. It could also

...end of the swimming pool. Your situation is unusual in that most of the time these will stay in the deep end and not get to the shallow end. Make sure that your hose is the proper length and the hose ...

...end of pool and stays there what do i need to do so that it cleans the whole pool? There are a couple of things that you can try to get your pool cleaner to cover both ends of the pool. First, use an ...