...sounds like it could be the shaft seals, which is a cheap fix.The Jacuzzi Magnum calls for seal 35-423-1021 You might consider replacing the seal plate O-Ring as well. -
...11.3 psi. The max psi (head) the pump can operate under is 40 psi or ~85 ft./hd at which flow is ~35 gpm. In other words, in a pipe system with low resistance it moves up to 105 gpm and in a very ...
...RUNNING TOO HIGH I HAVE A STA-RITE POSI FLOW II, 70 SQ FT CART. AND A 1 HP MOTOR. IT IS RUNNING AT 35 PSI. WHEN I REMOVE THE CART. IT DOES NOT REDUCE THE BACK PRESSURE. I AM ALSO RUNNING AN INLINE ...
Question about Pool & Spa
My heater only heats the water ti 35 c and will shut down and the temp runs at low 30 c How do I fix this problem? go into menu there should be a calibration you can adjust
my pool. its 18 feet by 4 feet round. its the intex salt water system. for the 18x48, you will add 135 pound (60 kgs) to start. When the Low Salt light comes on you add 35 pounds (15kgs
...a replacement P/N is SPX1600D. Not normally a stock item, but available online everywhere, about
...many parts due to being water cooled. My initial suggestion is replacement. You could post to me 35 A Davies St Kincumber ...
...tell you exactly how much to add when the low salt light comes on. On my Intex I would need to add 35
116 questions posted
Usually answered in minutes!
146 Questions
99 Questions
7 Questions