...turns on the bottom of the pool. A cleaner going in circles is an indication of a problem with the drive mechanism on the same side as the unit turns. If cleaner uses drive belts, check them for ...
my nitro just goes forward, never backwards. It is either the pump motor which controls the drive motor or the drive motor itself. Most of the time it is the drive motor. You can purchase the part and
Acqua water shark won't move Starts to move then stops This action is a typical response to a drive motor unit with water intrusion. While the motor is probably not completely water-filled, the amount
how to replace drive belt tigershark changing the drive belt is possible but there is a whole process to do it correctly. you may be able to find a service manual on the hayward website that will ...
...to replace? Thanks, Louis Here are some things to check: 1. There are belts inside the unit that drive the wheels. These belts often fail (shred) and must be replaced. 2. There is a paddlewheel ...
...will not roll You might need to perform some maintenance on the automatic pool cleaner wheels and drive system. Remove debris or tree leaves caught in the axle bearing. Do not turn the drive wheels ...
...shoots from the top. There are two motors usedi n an Aquabot. The pump motor is separate from the drive motor, and the drive motor acts to drive the wheel tubes by means of a belt drive system. If ...
83 questions posted
Usually answered in minutes!
125 Questions
2 Questions
2 Questions