Question about Hayward Pool & Spa
...pool cleaner Some "water shooting" is normal with any pool cleaner no matter what brand. It sounds like your tail valve may be turned up too high. At the base of the tail there is a small plastic ...
...pool filter. If one of these is full or clogged, it could be weighing part of the cleaner down. Check all of the hoses, connections, and swivels for leaks that could cause loss of water pressure. ...
...pool y Jet Vac cleaner runs for a few minutes then gets stuck in a corner or by the steps. The tail continues to move; the vac is still working but won't get moving around the pool. every pool has a ...
...tail is moving. The wheels are not moving 1. debris in the water management system (hoses inside the cleaner) 2. black gears in cleaner need replacing (360/380) 3. belt kit (polaris 360/380) or drive ...
tail doesnt sweep Make sure the opening at the end of the sweep hose is not blocked by the sweep hose scrubber. You might also need to adjust the screw that holds the sweep hose in place. If it is too
What to do when the Polaris 380 wheels do not turn? The motor is good and the pressure from inlet seems good. The tail moves easily, but the wheels do not move any. Check for hair on the vertical axel
...tail is not moving....what do i need to check There is a screw that controls the flow through the tail, possible you just need to loosen this to allow more water through. Also it is not uncommon to ...
3 questions posted
Usually answered in minutes!
337 Questions
104 Questions
92 Questions