...change. Noted that discharge water was cold. Water in tub warm (90's) display reads OH. Disconnected tub power, reconnected (stopped emptying tub water too) Tub cycled through jets, bubbles, now ...
...temp, fl error code 10 year old opal plus qca tub. Noisy pump but tub working ok until after water change. Now get FL error code. This sounds like your motor is going out. When they get noisy and run ...
...tub model126-dkn-4248-2 and ita been running for about 4 hous and wont heat up i would also like an owners manual for one but dont know were to look it may take longer to heat to desire temp. if ...
...temp and heats the tub less often. The F8 is usually indicating Filter=8 hours of filtration. Change modes to standard, and change filtration to desired level. If you do not have the manual for this ...
...change u must press temp button then light button you want to b on standard mode STD I have a great lakes hot tub, over the weekend it was shut off and drained. It was left that way till I came home ...
...a dirty filter, so I drained my hottub, cleaned the filter then refilled my tub. It is in sleep mode, press the "temp" button then the "light" button, to change modes, ST will be your standard
Question about Qca Spas Pool & Spa
...temp stays @ 82 degrees? This appears to be the sleep mode, which is a freeze protection mode. You need to get your owner manual out and change the mode to standard so it will heat. Rod US Parts ...
...temp button the either the light button or the jet button usually that will change modes u want st or std mode which means standard. or if u have a mode button try that 1st. or email me a copy of ...
...temp button, and then press the light button, that will change the mode of the tub. your motor was frozen and you need to replace gaskits and most likly the impellar please have a look at where the ...
58 questions posted
Usually answered in minutes!
55 Questions
21 Questions
