...CHF. Has good flow. error code should be inside heater make shure you have adequate gas pressure also sounds like bad flame sensor when flame sensor doesnt sense flame it will shut off after 7 ...
Codes for model 335B Raypack Gas Heater Codes should be found inside of the cabinet in the uper left corner. If they are not there, here are the basics EOL = Testing mode BDI = BOARD FAILURE EEP = ...
Code is on, and heater won't fire his indicates the flame roll out safety switch is bad. This part is usually mounted right above the burner tray. It is a white ceramic piece with two wiring terminals
...code that means that the flame from inside the heater has rolled out into the control area. There is a fusable link that is a safety that might be defective and need to be replaced. This is a ...
...code on the screen, meaning ignition problem. I am 70 feet from the gas meter, so I used 1" gas line for good measure. Also, double and triple checked the wiring. Any ideas? Look at the sensor that ...
...code reads "ROL" with "service" flashing. What is likely going on? The roll out safety switch has gone bad. This is a wax switch that melts and opens when flame comes out of the box and up the front ...
222 questions posted
Usually answered in minutes!
176 Questions
43 Questions
49 Questions
