NRS Digital Spa / Hot Tub Controls "balboa control panels" Questions

Balboa VL700S control panel jets 1 not working I have a platinum legend hot tub with a Balboa VL700S top side control panel and a hs200vs board (vs500). When I turn the power on to the spa it runs ...

...Balboa CL8000 controller. I just installed a new transformer. Everything works but the control display doesn't work. It looks like I have no power coming out of the board to the display plug When the ...

...Balboa control panel, manufactured in 1992. When you plug the spa in, it will shut down and read Sn on the topside control panel. We have replaced the high limit/temp sensor to no avail. If you jump ...

...balboa does not manufacture hot tubs! They make control systems for hot tubs. If you are no longer able to switch between modes, then your topside control panel buttons are dead or falling. But... ...

...Balboa controls.Just wired it up 240v.as soon as i flip the breaker it trips.disconnected wires from pump relay and connected them together,now the breaker stays and the pumps will run,but i have no ...

...balboa pump into my 1996 beachcomber hot tub.There are some white wires I dont know where they should be going to! While this is not an easy thing to troubleshoot offsite, if you want to email photos ...

...control issue but I don't know where to start to trouble shoot it. Can anyone help? It's a Balboa spa pak. Thanks! Flow issues can be frustrating, check each of the following1.  ...

Balboa spa pack so the controls are very nice (I believe it is an ML900 control panel) and you can set everything from the topside control. Download the Paradise manual here: http://discounthottubspas

...Balboa control panel that I opened up and tested all the fuses and of course checked for proper voltage. The pump will kick on for 2 seconds and cut off. The pump will reset itself and show Pr for ...

Balboa does not make spas, just control systems. but that is enough info to begin a troubleshoot process... do you have anything displaying on topside control panel? Fault codes? When you say no power