Pump not working The filter is not working need more info does system have power to pump motor? if not check breaker if voltage from breaker check switch if you do have power to the pump motor sounds ...
...pump will not work We have 2 filter pumps and neither one would work. My husband kicked them both, and finally one started working. The other one still will not work. This has been in the garage all ...
...pump that is not working. I have power from the circuit board but the pump does not come on to close the flow switch therefore it will not heat. If power (240v) to pump and impeller spins, it ...
...working Water was leaking from out filter basket housing, we replaced the O-ring as well but it still squirted water when we turned the pump off. When we turned the pump back on the pump made a small ...
Question about Pentair Pool & Spa
...pump stopped working? I checked the breaker and it was fine. Nothing is happening Try connecting the pump to the mains and bypassing the timer. If the pump works then the timer is faulty and needs to ...
...clean, then your problem is electrical. First make sure you are not using an extenesion cord. These pumps do not work well with a cord over 6ft long. Then make sure that the pump is on a dedicated ...
...pump not working? I am not exactly sure what water feature you are referring to. If your pool pump is not working at all, you will most likely need to prime it. Also, make sure that your breakers are ...
...pump and a Hayward Navigator sweep. The sweep was working then stopped. Pulled it apart found bad bearings replaced them. Ran sweep again worked at first briefly then nothing. Pulled apart pool pump, ...
...working my pump will not come on only hums Your pump will have to be either rebuilt or replaced. Look in your local yellow pages under pump repair. Especially at the beginning of the season, the pump ...
106 questions posted
Usually answered in minutes!
55 Questions
47 Questions
21 Questions
