...VACUUM WITHOUT LETTING WATER OUT OF THE POOL? Your valve should be set to filter when you vacuum, not waste. put vac with pole and hose attached put other end of hose into skimmer usaully has a plate ...
...pool vacuums use a vacuum head attached to a 2 inch diameter 40 foot long hose. the end of the hose (not at the head) inserts into a similar sized hole located in the bottom of the skimmer pot UNDER ...
...pool gets a lot of grass and leaves, I select skimmer only or when I vacuum. I select main drain only when there is more debris at the bottom. OK recirc is only recirculating within the piping system ...
...pool.The pressure after a backwash is about 5psi and does not climb except if i vacuum the durtiness.I am afraid some of it goes back... There is no oring from the lateral stand pipe where it plugs ...
...vacuum hose and at the other end hold the hose over the pool jet whislt the filter is pumping water. This will force all of the air out, the unit will then sink again. Then, without bringing the end ...
...vacuum is low, pressure in filter is low and pump appears to be louder then normal what's the problem If pressure gauge on filter is low, then most likely problem is obstruction is suction side of ...
...pool. Is there a way to attach hose and vacuum without repeatedly unplugging and replugging the electrical supply? The suction always holds the skimmer vacuum adapter so tightly that I need to ...
839 questions posted
Usually answered in minutes!
131 Questions
104 Questions
113 Questions
87 Questions
78 Questions
