Question about Hayward Pool Products Pool & Spa
...to make sure the spider gasket is not damaged or out of place. Make sure to install the multiport valve in the same position. You can get a replacement gasket at most pool supply stores or
Question about Hayward Pool & Spa
...pool guy. There doesn't seem to be any kind of multiport valve or way to backwash water from the filter. Was this installed wrong? If not, how can I backwash the filter? This is a DE (Diatomaceous ...
...multiport valve o ring. Be sure you have correct sand (pool filter sand only) IF all this is ok, try backwashing till glass is clear. Run on rinse position for a few min. THen go back to filter and ...
...multiport valve. at start up the filter pressure reads 40 psi. after multiple backwashes and rinses the pressure goes down to about 15 psi but slowly climbes back up to 40psi. The psi is around 15 ...
Question about Pool & Spa
...pool after vaccume to waste/dump then id say the packing seal on your multiport valve is broken/ damaged the multiport valve is the thing with the handle on it that you move to adjust filter/water ...
multiport valve to the rinse position, this will rinse any remaining dirt from the top of the filter and valves so that it does not return to the pool. Once the water comes out clean, return the valve
839 questions posted
Usually answered in minutes!
131 Questions
104 Questions
113 Questions
87 Questions
78 Questions