Hayward SAND FILTER, PRO SERIES "line pool" Questions

...pool return line, and the vertical threaded end (on top) plumbs into the Polaris return line. This is a dedicated return line for pressure side pool cleaners that has been pre-plumbed into the pool ...

inground pool 80% filled but no sign of water in skimmer lines,or bottom drain lines Hi there, I'm not quite sure what your problem is. There wouldn't be any water reaching the skimmers in an 80% full

...pool line, flush line and return lines on a Hayward sand filter pump S180T This website contains a copy of the owners manual for the S180T pool filter. It should have all of the information that you ...

pool. I am going to give you several things to try. Check the return line water flow and redirect it if necessary. Make sure that your hose is long enough to reach all ends of the pool. Make sure that

...line to which Kreepy Krauly is attached. If this is not the problem, it could be that the pool pump and filter system that you have may be too small It should be capable of providing at least 25 ...

...line with hose water. Also cleaned the pump (took it apart and looked for pine needles). Do I need to replace a o-ring in the pool or something?? Check the o-ring and bushing on the pump diffuser.You ...

...pool return line on your system. There are several different check valves on the market, some have a clear lid that you can inspect without taking it apart. Some of them cannot be taken apart. Your ...

...fine 12"-18" above water line. Distance from pool shouldn't be a problem as long as your suction pipes are below water leavel. More than that you should put a check valve in line just before the

pool and the discharge line goes from the pump to the pool return, the flow only goes one way regardless of the filter settings, remember, the pump always pulls and pushes water in the same direction.