de at the bottom of the tank. The flow of water is very slow back to the pool If you water flow back to the pool is slow, there are several things that you can try with these pool filters. First, make
de powder coming back into pool water from filter when i put the powder in the scimmer to start fresh, the powder flushes back into the pool throught the jets, you can actually see it flowing back ...
...DE-6000 I have also inspected the filter elements and none of them appear to be ripped or torn. Thanks Bill you will get a bit of flow back when first turn on pump after service. If you are not - use ...
...DE coming back into the pool. After a day or two it stops and works great. Is this normal? And what is causing this? Am I adding too much DE? Thanks, Glenn Buddy is this happening, after the pump ...
...DE Filter Model#EC45 I have to keep backwashing it, it flows heavily back in the return but it only flows good for a little while. What do I need to do? It isn't filtering the water properly. Here is ...
...The alternate method would be to disassemble and clean. You could have an air leak on suction side of pump. Check cover gasket, hand knobs, hose, clamps, etc. Replace or tighten them as
...de backflo into motor from filter when I turn the flo valve that enters the pool to the off position to clean out the skimmer, the water from filter flows back into skimmer through the motor. Filter ...
839 questions posted
Usually answered in minutes!
131 Questions
104 Questions
113 Questions
87 Questions
78 Questions
