...Smith 3/4 HP pool pump impeller? You'll need information from the pump that the AOSmith electric motor is attached to in order to get an impeller or any other pump parts. If there is no nameplate for ...
...Smith pool pump motor. How to get the impeller off? Which direction does the impeller spin off? Where to but impeller and seal? Thank you very much Greg The impeller is just screwed on the shaft. ...
ao smith sp 1520 2 hp pool pump. the impeller broke off the shaft. how do i change the broken impeller please Remove the back of the motor ... you will find there are flats on the shaft. Put your 7/16
...THE ONE YOU GOT IS FOR A BIGGER MOTOR.. THESE IMPELLERS CAN BE A PAIN TO ID, OR EVEN FIND .. TRY THE IMPELLER FOR A 1HP. I BET IT WILL WORK JUST FINE .. JAY THE POOL PUMP REPAIR GUY IN LONGWOOD FL
...AO SMITH motor, pump Leaky 4 HP hot tub pump seal AO SMITH motor, pump Model DJAAYGB-9113 Code 1H99Y I have removed the impeller, and it looks like the spring loaded face seal is worn. How do I ...
Question about AO Smith Pool & Spa
...AO Smith 2HP 56Y CX) won't turn over when switched on. Makes slight humming sound. Removed the motor from pump housing. When I spin the impeller when powered on, the motor starts up Pool Pump Motor ...
how do i tear down impellar housing on ao smith 2hp bn50 pool motor? take the impeller housing cover off. the shaft is threaded onto the impeller. Host the shaft and unthread the impeller.David
Question about AO Smith Pool & Spa
ao smith pool pump motor keeps tripping out under load New AO Smith motor for pool pump runs correctly with impeller attached on the bench. When installed, it also runs fine until priming is completed
pump. 2 Motor has died, how to disconnect from pump. 2 speed 1081 pool and spa, HP 2.5/.42, 230 volt. amps 11.5/4.0 The thru-bolts hold it to the seal plate and the impeller is threaded onto the shaft
7 questions posted
Usually answered in minutes!
774 Questions
131 Questions
104 Questions
113 Questions
87 Questions