...flow through the pump. Check all inlets, clear skimmer baskets, and ensure the primer box (witht he removable see through lid near the pump itself) has water in it before starting the pump. If there ...
Question about Pool & Spa
...valves Not enough water in tub Plugged impeller Falling / failed flow sensor Or... Sensing flow, but pump is NOT on, so there's no way for the sensor to be reading flow! fix - replace flow ...
flow in pump the pump is running, but there is no water flow. cleaned filter. no luck . I hve only had it for 1 week The impeller in the pump unit could be broken. If there is water flow into the pump
...Flow to Booster Pump Bought replacement booster pump and can't figure out how to stop water flow to existing pump. Water continues to flow out drain plug after I remove it. plastic bag with a few ...
...pump flow slows during operation Pump primes then settles into its cycle (1200 rpm) but after several hours flow into the pool diminishes greatly. Filter is clean and back flushed. Basket is clear. ...
...pump flow seems normal Low flow is an indication of not enough water flowing through the system. Check the flow by removing the filter from the spa and see what that does for you. Many times even ...
...out how the valves work. In the filter mode the valves should be set so the pressure from the pump flows into the input of the filter and the output of the filter flows into the return line to ...
...flow or if the pressure doesn't go up, make sure that there is no obstruction in the line coming from the pool to the pump. Check the inlet basket, inlet strainer in the pump, look for debris in ...
...pump that when started has strong flow, but the flow decreases and my pool cleaner will stop moving within a few minutes. The flow seems to spit on and off. Any idea what the issue is? Make sure the ...
10 questions posted
Usually answered in minutes!
193 Questions
170 Questions
177 Questions
72 Questions