Electric Mobility Shoprider Electric Power Wheelchairs Scooters Trooper "scooter fault" Questions

...? www.ctmhomecare.com/PDF/.../Troubleshooting-Scooter.pdf This link will give you the fault codes for aCTM scooter but all are standard codes and should apply to your scooter also. Hope this ...

...scooter vital in all respects. Hi. Many scooters will display this fault code if the potentiometer is not exactlly centred when you turn on the key. The pot is not always faulty. Some scooters also ...

...fault 7, scooter will not run at all/ on fault 2 fluctuating on speed DISCONNECT THE BATTERY FOR 10 MINUTES, SEE IF IT MAKES A DIFFERENCE WHEN YOU RECONNECT IT. This sounds like the throttle pot is ...

...on the revo 3 wheel scooter? Fault ( 9 ) hi , that 's is a internal fault, most likely a bad connection to the controller, at worse it 's a fault with the controller. Regards Rob ...

...fault. Turn off the scooter with the key and count to 10 then switch on again. This will reset the fault in the system. If still have fault, try moving the lever in and out a few times in case the ...

...Scooter moves approx 10 feet then stops led flashes 8 times then stops Hi. 8 flashes is a fault code for a motor fault. It will be either worn brushes in the motor or faulty connectors to the motor. ...

...scooter the fault light flashes 8 times . i have changed the battery but the fault remains and the scooter does not function I believe that this is the same as the US version of the Drive Phoenix ...

...scooter fault hi i have a tga breeze mobility scooter,which has a penny& giles solo controller fitted,it is comming up with 6 bar fault code which in my book it says a inhibtor fault,check wiring so ...

...tx. Thanks Frank Hi Frank. It helps to have an electrical background and access to parts and fault codes etc. Our website has some common faults and solutions .www.scooter-works.co.nz Good luck.

i took a mobility scooter in because battery was distorted scooter was working when took in there is a circuit with fuse in on top of handles but they are now saying there is a closed circuit under ...