...electricians run wire from breaker to the ceiling box, and then other wires spread out from there and go box to box until each box has a black and white wire that connects back to original
...wire from the breaker goes to the nuetral/ground bar. The white wire that goes with the black wire goes to the breaker and the black wire goes to the breaker like it normally would. ( the white wire ...
...large amp draw, undersized breaker, bad breaker, bad wiring, damaged wires, loose wires, wires are too long, electrical device that is shorted or draws too many amps for the breaker and wire
Question about Siemens Electrical Supplies
breaker. Do not double-up on 240 Breakers Conduit: You want PVC conduit large enough to fit three #4 wires. Bigger conduit is easier to pull wires ... and maybe later ethernet wire, or alarm wire etc.
Question about Gb Electrical Electrical Supplies
...wire 20 amp breaker connects to 12 gauge wire 30 amp breaker connects to 10 gauge wire Home Depot and Lowes have a breaker and wire size size chart next to wire cutting machine These stores have guys ...
...breaker Bad circuit breaker was taken out from the AC air handler by tec, ($75.00) he bundled wires together without a breaker. He said, since the main circuit breaker panel is near by, I
...wire into the breaker before placing it into the box...place the back or wire end of the breaker under the tab first and then rock the breker into the box and firmly push it onto the bar ...
...wire exceeds breaker rating, it trips.Something is causing heat on the wire, wire is too small for the amp draw, there is short circuit, or breaker is bad.Replace breaker and/or test wire.Put ...
Question about Sylvania Electrical Supplies
...breaker, but the wire sizes should each be suitable for the breaker size. That is, don't use two 14 Ga wires on a 20 Amp breaker assuming they will share the load. Each wire must be suitable for the ...
Question about Connecticut Electric Electrical Supplies
...wire on that breaker from the problem lights and plugs, back to the breaker, finding a compromised splice in the wire. The splice was cleaned up and respliced, and low and behold, the problem was ...
1 questions posted
Usually answered in minutes!
16 Questions
2 Questions
1 Questions