Hubbell HBL1221I Industrial Series Switch "motion sensing" Questions

sensing motion almost all the time. If it's in test mode - it will shut off but otherwise it keeps sensing it. This is in a garage - and door open or closed does not seem to affect it. I have the same

...Motion sensing switches wire identically to in-wall timers:Copy following link for different wiring options depending on the switch that is being ...

...motion sensing 3 way wall swithch and I am using it to replace a three way non motion sensing switch. I have it wired correctly, green to ground, black to common, and the red and brown wired to the ...

how to wire a cooper industries 6107 3-way motion detector switch how to wire a cooper 6107 3-way motion detector switch to be compatible with a single pole 6105 motion detector I opened the box and ...

...motion sensing light switches are not 3 way. so you will need to either only put the sensor on one end and wire all the legs together on the other end (this would act as a regular light switch) or ...

how install a sensing switch WSP-250 how install it This sensor has 2 wires coming from it, a red one and a black one. You must connect the feed (hot) wire from house to black wire and the red goes to

is their a way to adjust the delay time on a 390-6107xx-eg1d motion sensor light? If I stand still it cuts out in 3 seconds There is a switch on the front that allows for different times before ...

I have the cooper K6107v-l motion sensor. Is there a way to adjust the time delay? The device shuts off after about 3 seconds, I want it to stay on for 5 minutes. under the cover,of the device ,pry ...

...motion sensing, the flood light also detects darkness before allowing the bulbs to light up. If it is night, check also that some other light source is not illuminating the sensor. If so, that could ...