Black & Decker SpaceMaker ODC325 Coffee Maker "thermal cut switch" Questions

...thermal cut out which is positioned on the boiler. Thermal cutouts are connected to the main toggel switch. The thermal cutout turns of the power when activated. You can check it wity a meter (approx ...

...i still cannot get coffee!!! There may be a thermal cut-off switch inside that has failed. I've by-passed the switch myself, but don't recommend it. Another option is to replace the cut-off

"36FXE24 20017 L320F P139-97 A9906' is the fuse. I tested it with an ohm-meter - no continuity. Does this mean it's bad? Yes, if you have no continuity across a thermal cut-off, that means it is blown

...resistor-like, diode-like part in a clear tube mounted against the boiler, and it must be physically cut out of the line to replace it! Thermal Fuse 184 Change the fuse on the boiler. Its a quick

my dremal 8100 urns off by itself Is it overheating and therefore causing the thermal overload switch to cut it off due to excessive heat?

...is the fuse located on this machine? open the right side panel and you can see the heater of the tank, with that heater, there is a thermal cut out switch that you can reset by pushing the red

thermal cutoff switch part number is 36TMH0110603L320-32F (cuts off between 320 and 332F), which I can't find for sale. There is a slightly different one available, however, which cuts off between 315

...thermal limit, blown fuse, switch, Heater element, or cut wire (Mice). All are electrical problems and require a MFR tech. Contact your vendor or MFR for service. *Have a safe New Year, Aloha! ...

...problem might be the thermal sensor switch and or heating element going out.more likely the thermo switch usually cuts out at 190F depends. it is stamped on sensor. size of a dime ,you can find it

this if the other suggestions don't work ( with most appliances the thermal fuse being blown will cut power to the whole unit but as I have never seen one blow on a classic I am not sure in this case)