Black & Decker SpaceMaker ODC325 Coffee Maker "need heating element" Questions

need to know what type of heating element and the model # that i need to replace it with. there is a number on the heating element, the model of your toaster oven should be on the backside of the unit

need to see if the heating element is getting voltage. You can do this with a multimeter set to volts. Use a scale that is greater than 200 volts. If the element is getting 120v and is not getting hot

...heating element somewhere? Keurig says they are not available? Nope! I googled the part # found on the element, and It's left me with no results. You need to remove one from a brewer with another ...

heating element not working - all switches ok. Where can I buy a new element.I am in the MIdwest. Mike Will it heat in the steam mode? If it doesn't heat in the steam mode it might just be the reset ...

...heating element is fried, you will need to find a local person who understands basic electrical troubleshooting with a meter. Take the top off and have somebody meter voltage across the heating ...

...So you need to replace the heating element. You need also a good inspection to find if their is another reason why the heating element blow up or if its just because of exceed use of the ...

...heating element. To see if that's the problem, short out the fuse with a jumper wire, being careful not to leave it in that state long enough to be a safety problem. If that's it, you need a ...

...heating element from the manufacture. But, the crimp connectors and the thermo-fuse may also have to be replaced. You will need the crimp tool for the crimp connectors. You will also need a meter to ...

...base of the coffeemaker, and will likely need to replace the heating coil contained in a plastic sheath. Ensure you take a look at: http://home.howstuffworks.com/coffee-maker2.htm for further

heating element replacement green lites come on, unit doesn't start up Yes, it does sound like the heating element needs to be replaced. However, this coffeemaker is not built to be serviceable in ...