Question about Zojirushi Kitchen Appliances - Others
...that or the paddles themselves are sticking and not moving freely. The belt problem is an easy fix but if the paddles are sticking then it could be the sealed bearings the paddles rotate in is ...
Question about Black & Decker Kitchen Appliances - Others
...fix? Hi, There is a sealed bearing in the base of the bread pan. When this sealed bearing fails the paddle gets stuck and will not turn. Take the pan out of the machine and see if you can turn the ...
Question about Breadman Kitchen Appliances - Others
seal and washers inside the pan, you also have to remove the circlip on the bottom of the paddle shaft, you have to install the paddle from the inside once you have the right size e-clip installed. It
Question about Oster Kitchen Appliances - Others
...paddle goes on, that goes through the breadpan to attach to the bottom of the bread machine so it turns (drive shaft?) has fallen out of the bread pan. Will not stay in. It's in a couple pieces with ...
Question about Cuisinart Kitchen Appliances - Others
Fix: At the least you'll need to purchase a new pan shaft seal. Hope you're handy with tools and have some spare time to perform the repair. If not, you'll want to purchase an entire bread
Question about Black & Decker Kitchen Appliances - Others
...of the bread pan. This bearing is factory sealed, but the seal and the bearing is broken or worn causing the shaft to move freely. Unfortunately there is no fix and the pan must be replaced. ...
...paddle can be fixed with a set screw or two if you are mechanically inclined. The bushing can be put back into place with plumber's putty and work for 6-8 months making bread daily. You can use it ...
...fix is that the belt has fallen off the pulley and not turning the paddle or the belt itself is snapped. Secondly, it could be that the sealed bearing in the bottom of the bread pan is frozen. See if ...
Question about Oster Kitchen Appliances - Others
...fix the pan? Hi, Try putting warm water in the pan and let it soak. Try it a few times. If you can't turn the paddle by hand, then the sealed bearing that turns the paddle is frozen and can't be ...
...8200 model. I have been using it til now, but suddenly the paddle does not rotate anymore. It seems fixed even if the engine is working thank you Alex Hey Alex, It could be 2 things. Take out the ...
75 questions posted
Usually answered in minutes!
142 Questions
123 Questions
39 Questions
38 Questions
25 Questions