Bosch 24 in. SGS43C12 Classixx Free-Standing Dishwasher "washer taking 2 hours" Questions

...washer stays on clen for over 3 hours" ??? I think you mean the "Dishwasher stays in the clean cycle for over 3 hours", right? First question is "What cycle?" If it's the Pots and Pans cycle, or ...

...washer. Is 3 hours normal? TOO LONG- 1.5 / 2 HOURS IS NORMAL CHECK YOUR FILL TIMES SHOULD BE NO MORE THAN 5 MINUTES PER FILL PUT THE DRAIN HOSE INTO THE SINK OR A BUCKET TO MAKE SURE IT IS CLEAR ...

...taking more than two hours to go through cycle. Just moved into a rental property with an Ariston LS 2020 dishwasher. Have instruction book but no idea of how long a cycle should take. Has been ...

...2 to 6 hours is possible. The newer machines have a water heat cycle that will raise the water temperature. lets say your incoming water is 90 degrees. The machine want to see 140 -165 depending on ...

...setting purpose and dont understand it what does the settings do cuz my washer takes 2 hours for a small amount of disher settings should show you how the machine is to function. Do uou have a

...Do you physically have to switch machine off? The econo cycle is the shortest cycle on the dish washer. You have a mainboard issue with it or something. Most cycles on newer dishwashers take 2

...washer had finished its cycle. But about an hour later, I noticed it had started up on its own? It then proceeded to run for almost 3 hours before my husband canceled the cycle. We were kind of ...

2 hour or so task. My husband did it with the help of a local plumbing shop. Take pictures of the back of your unit and go to a shop, they'll set you up with what you need to do it. Connected directly

Washer went dead. replaced thermal fuse and it worked for about a week and went dead again. Before going dead it seemed to take it a long time to do a load of dishes. The last load ran 1 1/2 hours and

...washer is taking too long to complete. The "delay start time" keeps popping up with 2H, which I think means 2 hours delay. I have tried resetting the washer. I have adjusted the delay time to "0 H" ...