Bosch SHU3036UC Dishwasher "control board recall" Questions

Ad

control board and that resoldering FIXES the dishwasher - per a repair tech. Bosch contacted us twice about a potential recall on this control board, but our serial number unit didn't show up

Ad

Question about Bosch Dishwashers

1 Answer

...have had a recall on your model for the control board and that sounds like it may be your problem, if it is under recall Bosch will send someone out at no charge to install a new board (800) ...

Ad

Question about Siemens Dishwashers

1 Answer

...a cycle - what is wrong? Take the control board out, open it up, and resolder the heater relay or replace the control. It may be under the recall and you can get a new control replaced for

control board started smouldering last week. This was our second GE Profile DW with the same failure. The previous one was under recall. Fortunately we caught this one before flames were visible. Just

Question about Dishwashers

3 Answers

...control board. I am guessing that the control board needs replacing as the resistance from G5 to G6 is only 2Kohms instead of the 6Kohms as mentioned in your previous post. I was hoping to get a copy ...

Question about Bosch Dishwashers

2 Answers

control-board / circuit board. All valves, switches, heater appear to work. Won't run open the water inlet valve. Won't run the self-check program. Has a burnt connection on the control 'mother-board'

...control board, the brains for the machine, that sits behind the digital display. For those not "at risk" but with the water not heating and the run time increasing, the problem can still be with the ...

...in myself? be shure its not under the rework There is a recall on the control board of many of these models, butyour problem is likely not related. I have written a guide to help. It is here.

...control was bad and was told by a local supplier there is a recall on these control boards.... based on you explaination it sounds like the control is bad and will need replaced... good luck to

...control board but still will not start It's probably your Circuit Board (CB)! My dishwasher is on the second CB and it keeps blowing the dispenser transistor. This needs to be brought up to the ...

Not finding what you are looking for?
Bosch SHU3036UC Dishwasher Logo

46 questions posted

Ask a Question

Usually answered in minutes!

Top Bosch Dishwashers Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Mike Cairns
Mike Cairns

Level 3 Expert

3054 Answers

Cindy Wells

Level 3 Expert

6688 Answers

Are you a Bosch Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...