Bosch 24 in. SHU53 Built-in Dishwasher "counts down 1" Questions

...counts down to 1, then just keeps running. When I open the door, water is still going and suds fill the bottom of the dishwasher. When I close it again and press the start button, it goes to 13, then ...

...counts down to 1, then just keeps running. When I open the door, water is still going and suds fill the bottom of the dishwasher. When I close it again and press the start button, it goes to 13, then ...

counts down from 84. It washes and drains down to 1 in the cycle counts. Once the cycle is at 1 it doesn't stop washing. In that last cycle it kept washing for two hours. I had to cancel to finish the

...counts down to 1 minute on any cycle but will not drain except by manually hitting cancel. I've replaced a defective drain pump but it still does this- any ideas? my bosch dishwasher counts down ...

...counts down, at least on my model. 5. Finally noticing if all the normal sequencing is happening. Ie turns on, pump empties the dishwasher, fill occurs, arms spin, and so forth. you should be able ...

counts down normally until the 1 minute mark. It stays there until the Cancel and Drain buttons are hit. Same thing with Scrub Wash cycle. Rinse and Hold Cycle appears to work normally. I had the same

...down stopped at 1 but motor kept running. Water not drained. Is it the pump or the control panel broken? My Bosch Dishwasher failed to stop during its last washing cycle. The countdown stopped at 1. ...

...down arrow is not responding You somehow got it in TEST/Maintenance mode. I think if you PRESS and HOLD Start for 15sec, it will go back to normal. If not, pull the plug and let sit for 1/2hr

...counts down to 1 and sets there. It still continues washing until you turn it off with the power button Sounds like the heating element. It may be waiting for the water to hit temperature before ...

bosch dishwasher counts down to 001 and stops can not cancel the 1 minute left Very common"no heat" error for bosch to stay at 1 min. If the water doesnt get hot enough, it will never finish cycle