Bosch 24 in. SHU66C02 / SHU66C06 Built-in Dishwasher "rinse hold" Questions

...floor. This is what happened before I ran the cycle: I had mistakenly poured detergent into the "Rinse Aid" slot in the inner side of the dishwasher door. After one or two cycles, I realized the ...

...RINSE & HOLD program buttons, then turn unit on by pressing ON/OFF button. When program buttons are released, lights above them will flash. To end test program, press ON/OFF button.To check ...

rinse aid every use, so assuming you filled the compartment , that will hold enough rinsing aid for 35-40 washes before needing to be refilled. is it possible taht you havnet waited long enough for it

NOT DRAINING AFTER RINSE CYCLE The dishwasher is not draining after the rinse cycle. Holding water. How do I remove clogs, or will a new pump be required? Dishwasher is not filling in first cycle. ...

...RINSE & HOLD program buttons, then turn unit on by pressing ON/OFF button. When program buttons are released, lights above them will flash. To end test program, press ON/OFF button. To check ...

...hold the Rinse and Hold pad (certain models) or the No Heat dry pad (certain models) for # seconds to Lock or UnLock the controls I tried to press and hold the heat dry button and it didn't work but ...

Rinse", and I'll bet THAT light is the one that is on. Basically, you have the control lock (or child-lock) turned on. To turn it off, you have to press and hold the SANITIZE button for 3 to 5 seconds

...hold the Sanitize button for 3 to 5 seconds until that light goes off. Now your dishwasher will work! Something else is wrong. When the rinse aid dispenser is low or empty, it should not stop the ...

rinse and hold phase. It will stay there and rinse and rinse until the knob is manually advanced. It will then run the remainder of the cycle. food debris on dishes and in glasses - food debris behind

...rinse and hold cycle on for about 10 minutes; now every time I want to turn on the dishwasher it is in the rinse and hold cycle. How can I change it??? Hello, Welcome to FixYa. Your post doesn`t ...