Bosch Classixx WFL 2066 Front Load Washer "stopped drain hose washer" Questions

Ad

Question about Whirlpool Washing Machines

2 Answers

...goes through the wash cycle then just stops when it is to drain and then spin. Possible output hose kinked or some machines will not drain if lid is not shut or lid switch is bad. Check lid

Ad

Question about KitchenAid Washing Machines

1 Answer

...panel - water level switch. If water keeps filling and never overflows onto floor - likely that water is siphoning out drain hose. Raise drain hose higher or allow an air break at the drain hose

Ad

Question about Fisher and Paykel Washing Machines

1 Answer

...stopped on the drain cycle on three occasions. All three times pennys or dimes have made their way into the "drain hose" at the bottom of the washer blocking the hose or the last "hose connection ...

Question about Kenmore Washing Machines

1 Answer

hose to drain is cloged or the pump is blocked up in back of washer were drain hose is at remove back the hose that drains from tub to drain needs to be checked remove clamps and flush hoses,than look

Question about Bosch Washing Machines

1 Answer

...stopped with a "drainage blocked" light Look for a kinked drain hose. Make sure drain hose is not plugged. Remove drain hose from washer and inspect drain outlet on washer is not plugged. Stick your ...

...stopped in the middle of a clean washer cycle with the message LD in the time area. Now it is beeping and won't stop. 26 minutes were li LD generally means a long drain. This can be caused by debris ...

Question about Whirlpool Washing Machines

1 Answer

...cycle. try to put machine in final spin mode where all water from previous wash will be spun out the drain hose. once a siphon is started it can only be stopped by introducing air into the drain

Question about Maytag Washing Machines

2 Answers

drain hose has a loop at least as high as washer top. If the drain hose is not looped higher than tub water will continue to drain and it won't stop filling. If it doesn'y reach the correct fill level

Question about Whirlpool Washing Machines

1 Answer

...drain hose clamp and remove the drain hose gently lay the washer on its back keeping the rear of the console 2 inches from the floor until all water stops running out of drain hose connector stand ...

Question about Kenmore Washing Machines

1 Answer

...stopped restart you washer and it should stop filling.if it does not the yes you have a fill valve sensor problem.the drain hose usually always holds some water and during the filling process if the ...

Not finding what you are looking for?
Bosch Classixx WFL 2066 Front Load Washer Logo

646 questions posted

Ask a Question

Usually answered in minutes!

Top Bosch Washing Machines Experts

Brad Brown

Level 3 Expert

19187 Answers

NOEL
NOEL

Level 3 Expert

8606 Answers

Oliver Street

Level 2 Expert

73 Answers

Are you a Bosch Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...