Question about Samsung Washing Machines
...pulley. The pulley is what the belt (if applicable to your washer) rides on to spin your washers tub. The pulley can be made of plastic or metal. It could be simply worn out or just loose.Jul 27, ...
Question about Whirlpool Washing Machines
...washer and the drum pulley is loose with the nut is tight. removing the nut can see the pulley dose not fit on the shaft tight. The shaft has a flat on each side and the pulley diameter has one point ...
washer. Drum pulley loose Whirpool duet washer. Belt came off today. Had a problem where load of clothes did not drain as a result of the pump going bad. The drum load was quite heavy with the clothes
Question about Bosch Washing Machines
PULLEY- If the washer is making a loud noise the drive pulley might be worn out, cracked, loose or bent. Remove the drive pulley and inspect it carefully. If it is damaged or defective replace it. THE
...washer. look at springs for broken or one that may have come loose. inspect drive belt for broken or off pulleys. the drive belt is not turning pulleys, belt maybe broke or outa pulley grooves. or ...
washer fills and drains. drum does not turn. do I need to replace my motor? I took off back plate and noticed belt was off. I also noticed that pulley was very loose. I ordered new pulley and belt and
...washer. I went ahead and replaced the belt, but noticed that the pulley seemed to wobble more than what would seem to be normal. When I put everything back together and tried it out on a small load, ...
...washer in then start a loaded spin cycle to check for belt slippage and the motor operation itself. Replace the belt if loose or slipping. Remove the belt by turning the tub drive pulley and rolling ...
I am having problems with my front loader washer. The belt keeps coming off. Check the pulley If is loose tighten the pulley If it is making oblong shapes you need to replace the pulley
...loose set screw which pulley in not rotating properly) or defective (bent, broken or unbalanced; unlikely) pulley. Also, ensure your motor is secure (bolts, not loose) and motor-shaft is not bent for ...
675 questions posted
Usually answered in minutes!
457 Questions
351 Questions
272 Questions
222 Questions
251 Questions