Bosch Axxis WFL 2060 Front Load Washer "black dust" Questions

washer won't aggetate or spin out black dust on floor Motor coupler has worn out. The black dust is from the rubber disc. It's an easy fix.

black dust under washer Keep getting a fine black dust under the washing machine Drive belt may require tightening or replacing or seals are wearing outFairly major job . 

...black soot like substance is the motor carbon brush dust. i would get the motor brushes replaced and clean off all the dust from the pulleys and also replace the belt as it has been slipping on the ...

- is there black dust like particles? If there is -- you need a new shaft bearing ------OR temporary fix ---- white silicon spray into the hole where the black powdery dust like material is coming out

black dust under the washer! To me, it looked like it was bearing dust, or maybe dust from a belt wearing out? I am not sure but I think this great 17 year old machine can be repaired and I would like

Whirlpool washer has black dust under it probably belt dust. Many Whirlpool washers don’t have belts. It’s probably the motor coupler that takes place of belt that’s wearing and should be replaced

black dust (carbon?) on and around the electric motor? Is this a problem? Having removed the motor to replace the drum bearings and inner drum I notice there is quite a bit of black dust on and around

black huge dust particles after clothes or done washing The dryer uses a rubber belt and only lasts about 5 years +/- 1yr. So, when it wears down in the groove. Groovy eh?: No, seriously, the belt ...

...dust. This dust was in black lines going between components of the board. Cleaned around components of the board with a small soft brush. assembled & tested okay 2 months ago & still

black dust appearing at the bottom I would advise you to check the concrete balance weights located at the top and bottom of washer, it sounds like one or both have come loose or broken, thus creating