Bosch WFMC 3200 Front Load Washer "board control working" Questions

...is not working, check the power to the user control and display board. If the user control and display board has power, but it isn't working, replace it. The main control board may also be

...control board. replaced with the Motor Conversion Kit. Still not work. The display panel does not turn on. Could it be the main control board or something else? Solved problem. Replaced main Control ...

control board i have a mah7500aww washer for which the the LCD touch control board is dead. I have power to the machine, and power to the board itself. The door light works too. unit was bought in Feb

...control board. both are combined on the same board. this error code represents a failed Machine and motor control board. this single control board works as the main controller and, as the motor ...

...control board washer does not work after wash cycle was told it may be control board The control board is directly behind the control panel, where the setting dials area. They are connecting through ...

...control board problem?? The LED lights on the control board cycle randomly, some times not allowing the washer to be started. The lights blink and beep randomly all day, prompting us to unplug the ...

...control board and the motor control board. This could be caused by a faulty control board, a loose or damaged wire connection, or a problem with the motor control board. Here are some steps you can ...

...control board, if there is no action on the control board then you have to change the board, if the control board reacts to the program settings, it must allow inlet valve to open. the waterlevel ...

control board or a burned out control panel. I had a similar problem. I changed the control board first and it ended up being the front control panel. Nothing worked on the front panel. No lights came

...control board overfills trough and does not sense water when compressor is running. When in clean mode or when compressor is off the water light comes on and it stops filling. As soon as compressor ...