Bosch Axxis WTA 3510 Electric Dryer "noise coming drive shaft" Questions

noise, is this coming fromt eh motor, the drive or the inside. If motor checck if bearing/bush has worn out, if drive belts are faults, if the moving spindle shaft is tight with friction. A reassembly

...noise the drive pulley might be worn out, cracked, loose or bent. Remove the drive pulley and inspect it carefully. If it is damaged or defective replace it. THE TRANSMISSION, THE MOTOR COUPLER, THE ...

noise coming from dryer, still dries, how do I open it and what do I need to check Check the motor coil.. f your dryer is noisy, check these: Rollers Idler pulley Glides Rear drum bearing Blower wheel

...drive belt could be worn out. If the pulley is bad we recommend also replacing the belt. The glides on drum worn and making metal to metal contact. The drum slides or glides support the front of the ...

...noise and this is easy to check and inexpensive. The idler pulley is another part that frequently fails. Your dryer supports the clothes drum in the rear with a center spindle instead of rollers. The ...

...drive belt just to be safe while I was in there. -Now the barrel WILL turn, but makes an awful squeeling noise! When I took the back panel off, two belts are rubbing together between the idler pulley ...

noise may be coming from drum support rollers. As the rollers wear with age, they collect dirt, dust and lint and may need to be cleaned and lubricated. If the model number is correct, the rollers can

noise may be coming from drum support rollers. As the rollers wear with age, they collect dirt, dust and lint and may need to be cleaned and lubricated. If the model number is correct, the rollers can

...drive from the motor pully and operate the dryer while you listen for the sound, if still there, you've isolated the noise to the motor and can explore further to see what exactly is causing the ...

...noise, not coming from the vent or the heating element Most probably caused by one of the belts being frayed and about to break. You might want to replace the small drive belt (00096426) first as it ...