Question about GE Dryers
bulb socket is 120 VAC. Replacement bulbs are 120 VAC. Light in dryer only lasts a few days. I checked the voltage and it is 120 VAC. The replacement bulbs are 120 VAC. Hi, are you replacing them with
Question about Whirlpool Dryers
...replacement bulb from home depot and it doesn't work. Does my dryer need a special bulb? replaced bulb with standard 10 watt 120 volt bulb. Hello Eric; My name is Peter. I am a retired field ...
Question about Dryers
...replace the bulb. I have looked on u tube .I dont seem to be able to find what size globe it takes as I do have several Riva bayonet 15W globes. unless Bernina have changed , they use a screw in type ...
...replace light bulb. Also need bulb P/No. there are two tabs on light shield grasp both and turn to the left it should come off. if not a little friendly persuassion with a screwdriver should do it. ...
...replace this my self or does a repair man have to do it? I'm assuming this is a dryer and if the dryer still stops when you open the door then the switch to stop the dryer and light the light is ...
and seated correctly in the socket. Replace the light bulb cover and secure it in place with the screws or clips. Turn the power back on and test the light bulbs to make sure they are working properly
how do you replace the bulb inside the drum there is a clear plate inside the drum remover this and replace the bulb spare bulbs u can get from espares
Question about Maytag Dryers
Maytag dryer. LIght bulb blew, panel will light up but not run. I replaced bulb but it still doesnt work. I cleaned out lint. REplaced bulb but still doesn't operate. If I manually hold down ...
replacement bulb? You will need a buld rated for this service. Some bulbs are designed to be operated in an environment with vibration, extra heat, etc. They will last much longer than a standard bulb
203 questions posted
Usually answered in minutes!
224 Questions
201 Questions
100 Questions
35 Questions
27 Questions