Bosch HES 252/ HES 256 Electric Kitchen Range "glass stove top burners keep" Questions

...stove top burner wont stay on cut on high but wont stay on keeps cutting off help dont know how old unit is or how familiar you arewiththe unit, but the burner will need to heat up and cycle off/on. ...

...stove top burner, when turned off, keeps igniting. I've made sure the ignition is dry. I have to unplug the electricity for the ignition to stop. Any ideas? Joe I have a Kitchenaid Model KGCT365x and ...

...stove has the glass/ceramic top with no wells & no way to get to the burners...only see screws inside burner and I don't want to remove until i know the proper way...thanks for your ...

...stove looking new. Thank you. Scotch brite has your solution they have a kit for cleaning ceramic cook tops .. cook top cleaner kit go to www.3m.com there is also a coupon you can print out. let me ...

glass top stove and my wife keeps telling me I need to get the unit fixed because the burners get bright orange and then seemingly turn off. It will oscillate back and forth every 15 to 20 seconds. My

...stove and it keeps coming on and off faster than the others I had a problem where the unit stop coming on its an 8" burner. When the replacement came i noticed the element was the same but the ...

...stove Hi, Is this a glass top type? If it is then DO NOT use any abrasives, soft scrub, ect. Use a razor scraper like for paint and keep it flat. Then purchase any commercial glass/ceramic cook top ...

...glass top stove ? If the substance is sugar and it hasn't etched your cooktop, then the easiest way I have found is to use a NEW sigle edge razor blade and carefully scrape it off with that. Your ...

...glass stove top After I cleaned my stove top the burners would not stop clicking. I had turned all the burners on after I cleaned the oven to check if they got wet and to make sure I put the knobs ...

...glass top stove and now it has a small 1/2 inch diameter and 1/16 inch depth place where teapot sat in the middle of the burner. Is there a repair for this problem? Thank you in advance for your ...