...gasket you need then it does have to be exactly the right one or the tank will leak. if you're having trouble finding Eljer parts i would just buy a"fluidmaster" tank rebuild kit from home ...
...fluidmaster repair kit. Now I don't get any water coming from under the rim of the bowl when flushed. I noticed the rubber gasket wasn't the same, does this matter? No, that won't make a difference. ...
Question about Home
...it, so we had to put the old noisy one back on there. How do we get the water to go through the Fluidmaster? Was there a washer or flare joint. Might have been the wrong type of connector. Look
...gasket may need to be replaced. An easy way to check this is , the next time you hear it kick on, wait for it to stop and put a couple drops of food coloring in the tank and wait about twenty minutes ...
...Fluidmaster complete repair kit and now it flushes good, but its leaking. Its either the tank bolts or the gasket. I've already removed the tank twice and redone it. Maybe I have over ...
...gasket? Thank you, Blair Hansler Older Eljer toilets are good for this and yes you need to replace the complete flush valve assembly. I would recommend putting in a fluid master system as they in my ...
...gasket... and afraid to "over tighten"... any ideas? As long as there is no water leaking from the tank to bowl connection, you are OK. You would know if it was leaking here, because you would have ...
...gasket is up all the way on the nipple, so the tank will tighten to the stops on the bowl. Now put another set of rubber washer, and metal washer and nut (thumb nuts are fine here) Tighten till tank ...
...Fluidmaster 400A. Instructions on box of 400A are easy to follow and if you have flex connector you won't need supply line washer. I would reccomend that before you install new valve that you put ...
50 questions posted
Usually answered in minutes!
50 Questions
35 Questions
